This
machine is a dedicated drive shaft balancing machine for 3--100
kg balance shaft technology.
The machine uses an
infinite position measuring sensor speed sensor, it has the
overload capability, high sensitivity, the study and durable.
The machine rotor mounted
removable card is the right way of supporting frame can be
fitted to achieve a higher speed card. Right quick swing
frame with manual locking mechanism.
The operation of the
machine: manual start, automatic measurement memory, timing
shutdown.
The measurements show that the
native way of balancing machine with SP-type digital gauge.
Technical Specifications
SPECIFICATION
Shaft
of the quality range of Mass of workpieces 3
-100 kg
The
maximum length of the shaft
2400 mm
Check
the appropriate shaft should be suitable sensitivity ratio1
-5 G
. cm
Balancing
machine speed range
: 1700, 3400, 2400, (4800) rpm
Power supply 380v 50hz 3ph
Power
Motor rating 2.2/3kw
Overall
the machine (L * W
* H) Dimension (L * W * H)
Host Mainframe 3600 〜
600 〜
1100mm
Electronic
measuring and Control cabinet
500 〜
500
〜
1100mm
Five
swing frame
joint
axis
correction
is to solve
the
"face
gear
shaft,"
the only
way to
balance
Multi-section shaft balance: the need
for more surface electrical measurement signal switching system,
a number of swing frame.
。 As
with face gear transmission torque advantage, so now many of the
trucks using this structure, drive shaft, but do not face the
same tooth structure of concentricity, so the use of a single
balanced way can not solve its balance, only to imitate balanced
approach to their working conditions before they can solve their
vibration, bad sleeve (center support bearing) problem.
Turn
Speed
Diameter of the workpiece by the workpiece quality and speed
options to consider when balancing the drag motor power and
carrying capacity of supporting frame, so the balance should be
noted that the workpiece speed selection balance: a balance
shaft speed of light vehicle selection 2400,
3400RPM, heavier transmission axis (> 50
kg) choose 1700RPM。
Working speed of 4800RPM balancing
machine is mainly used for short-time work test shaft, drive
shaft of the process is generally not used for balance.
