Xuanhua Beilun Balancing Machinery Co Ltd

嶄猟a

Special rotor balance process

METERS for Balancer

 

LARGE FAN ROTER END DRIVE 

BALANCER

Universal BALANCER

YFW-16000

YFW-10000

YFW-3000

YFW-300

YYQ-160

YYW-30

RYQ-5

 

 

YFW-300

YYQ-160

YFW-300 

 

 

          

YYQ-50 The Hard Bearing Balancer

(With Belt drive)

The Y series of balancing machine , is an ideal versatile for rotors of different types .

It`s easy operation. Legible reading , high efficiency ,

and to be suitable motor ,fan ,crank shaft machine etc.

 

 

SPECIFICATION

 1 Mass of workpieces           2--50kg

 2 Max.diameter of workpieces        800mm

 3 Journal diameter of workpieces      10--90mm

 4 Distance between two bearing supports of workpieces journal      900 mm

 5 Balancing speed (when the diament of driving rotor is 100mm)     600--2500 r/min

 6 Min. achievabl           380v 50hz 3ph

 7 Motor rating             0.85/1.1kw

 

          others:   YYQ-100    YYQ-160   YYQ-300   YYQ-1000

 

   HP-16 hard bearing balancing machine computer electrical measurement instrument is a balanced machine dedicated computer: high reliable industrial computer chip circuit, direct 220VAC power supply, strong anti-interference, adaptation to unstable power supply conditions, for the unstable speed can also be measured. Software vector solution measurement data, large font digital display. Overall 4 digit display input parameters, a key indicator of static balance, can be set parameters of the data stability.

  The measured data can be processed and processed after shutdown: the different parameters can be transformed, and the measured results are more consistent with the actual measurement results. The operator if you need other parameters of the solution results, you can enter the corresponding parameters, the corresponding calculation results. Once again change the calculation parameters, the same can be directly obtained after the change of the calculation results. No need to boot the measurement again.

  Automatic (or manual) memory while driving the engine shutdown function, customer self calibration function, recovery of the factory calibration function, sensor signal line fault judgment and indication function.

 

Address: Wanfeng rd.Dongmenwai Str. Xuanhua Hebei Province China

Post code:075100

E-mail:cdf@beilun.com.cn

Tel: +86 313-3112400      +86 313 3175800

Fax: +86 313 3175900

 

 

 

 悉ICP姥05002859催