Xuanhua Beilun Balancing Machinery Co., Ltd.
中文a

Special rotor balance process

METERS for Balancer

 

LARGE FAN ROTER END DRIVE 

BALANCER

Universal BALANCER

YFW-16000

YFW-10000

YFW-3000

YFW-300

YYQ-160

YYW-30

RYQ-5

 

 

 

  Our balanced electromechanical tester uses industrial single-chip technology and has a fast start-up speed, making it especially suitable for factory work environments! The technology that can be measured after turning on, memorizing and stopping, can input and change the automatic calculation result of the parameter, the electrical measurement box has the data record of the measurement result, and the measurement data sd card records the function.

 

  Our hard-bearing balancing machine is a permanently calibrated hard-support balancing machine.

  The rotors that balance different shapes and weights do not need to be recalibrated. The size and angle of the unbalanced values can be measured at a single start.

 YFW-300 Balancing machine

Balancing machines for fan

Down load: Manual of balancer type YFW300

Work Diameter:  1500mm  

Mass of workpieces: 300 KG

 

YFW-16000 Balancing machine

Balancing machines for fan

Work Diameter:  4000mm  

Mass of workpieces: 16000 KG

 YYW-30 Balancing machine

Work Diameter:  600mm  

Mass of workpieces:30 kg

HP-15 Electrical measuring instrument for Balancing machine

    The single interface displays all the contents,

    All of its own hardware and software intellectual property rights.
   Computer software vector solution of measurement data, full interface digital and graphics display form.

RYQ-5 soft-bearing high-precision balancing machine

The machine is not a simple replica of the old-fashioned soft-bearing balancing machine, from the mechanical structure and electrical measurement system has been completely redesigned. Mechanical durability greatly improved.

        YYW -16000A  Balancing machine

 7000mm large diameter

Mass of workpieces: 16000 KG

Low-speed Balancing  : 60-1000 rpm

 

RCD-100 The drive shaft balancer 

 YYQ-160 Balancing machine

Work Diameter:  1100mm  

Mass of workpieces:160 

HP-16 Electrical measuring instrument for Balancing machine

The instrument is a dedicated computer for balance machine, as long as you store a good measurement data, the customer needs what data, you can enter different parameters, the results of different calculations. The calculation parameters can be changed at any time, and the calculated results can be obtained directly.
You can first enter the parameter a, b, c, r1, r2, aggravating, to the heavy way, as well as static even solving model, and so on. Can also be after the input, can also be modified at any time, electric measuring box will be at any time to change the output value.

BL-15V General Balancer Meter

Detection of unbalanced signal for various dynamic balancing machines.
This system is a computer controlled balancing machine for measuring instrument.
The electric measuring system has the functions of automatic sensitivity control, rotor data automatic (or manual) storage, measurement data (the size and angle of unbalance), and the function of the direct reading, dynamic balance and static balance.
The rotor can be saved and extracted by the keyboard, and the data of the 99 rotor can be saved. The data of each rotor is made up of 11 data:


C11∠11   C12∠12   DP2   DP1,   C21∠21   C22∠22  n

RCD-100 The drive shaft balancer 

 

Electromechanical measurement and mechanical introduction about hard bearing balancing machine

What is dynamic balancing

 

 YYQ-100 Balancing machine

Work Diameter:  900mm  

Mass of workpieces:100 

 

How to determine a reasonable balancing accuracy

 

 

Addr: Wanfeng Rd Dongmenwai Str. Xuanhua District Hebei Province China

Post code:075100

E-mail: [email protected]              

Tel: +86 313-3112400  

       +86 313 3175800

Fax: +86 313 3175900

http://www.balance.net.cn

 

冀ICP备05002859号       冀公安备13070502000109

 
 
 
   
   

 

 
YFW-300  
YYQ-160  
   
YFW-3000